forklift tire tech at workForklifts don’t have a traditional suspension system so the entire weight of the forklift and its load rests on the tires. Your average 5,000 lb. capacity forklift actually has to support up over 11,000 lbs. of weight on the front tires when fully loaded which is no small feat. Using a forklift with tires that need to be replaced can damage your forklift and create a dangerous environment for your operator as well as others nearby. Tires that need to be replaced can cause your forklift to be unstable. Riding in a forklift that needs to have its tires changed is uncomfortable for the operator and can lead to fatigue and mistakes.

Because tires that need to be replaced can become a hazard, it’s important to know how to tell when it’s time to change yours. During your pre-shift inspection, make sure to look for these warning signs that your tires may need to be replaced and contact your local, authorized Toyota dealer for assistance if any of them are detected.

Forklift Tires, When Enough is Enough

Tires wore over the wear line. Many forklift tires have a wear line, often called the 50% wear line. When the wear of your tires reaches that line, it’s time to replace.

Chunking. If pieces, or chunks, of your forklift tires, are falling off, that’s a good sign you need to replace them.

Tearing on the tires. Similar to chunking, if your tires are tearing off in spots, they need to be replaced.

Flat Spots. Your tires should be round, if they’re flat in any place, it’s time to replace them.

When inspecting your tires also make sure to check if there are any uneven signs of wear on each individual tire and between tires on the front and rear and on the left and right side. There could be an underlying issue that is causing premature wear due to the forklift’s condition or the application. Be sure to check your rims for any bending as they may need to be replaced as well. Tire pressure on air-filled, pneumatic tires should also be maintained at the manufacturer’s recommended level.

State and Federal law requires that you be fully trained and qualified to before performing maintenance on wheels and tires. Toyota certified technicians are available to assist you with recognizing potential issues and with maintenance and repair. Contact your local, authorized Toyota dealer for more information about setting up an appointment today.

 

We would enjoy hearing from you. Post your ideas or comments below, let’s start a dialog.

The original article was published by Toyota Material Handling U.S.A.

For more information, insights or conversations regarding your forklift or material handling needs. You can visit our online contact form, use our contact form seen to the right, call me at 763-315-9288 or email kthill@toyotaequipment.com.

We would welcome the opportunity to cover your material handling questions or concerns. Toyota Lift of Minnesota works very hard to be your partner and material handling, consultant.

Questions, Needs or A Concern? Contact Me Direct

Related Posts Plugin for WordPress, Blogger...